Free Plumbing Inspection Report Template
Plumbing Inspection Report
I. Summary of Inspection Findings
This section provides an overview of the findings from the plumbing inspection conducted at [Your Company Name]'s request.
-
Inspection Date: June 1, 2050
-
Inspector: [Your Name]
-
Client: [Client Name]
-
Location: [Your Company Address]
II. General Observations
In this section, we outline general observations made during the inspection:
-
Water Pressure: Adequate throughout the property.
-
Visible Pipes: No signs of corrosion or leaks observed.
-
Fixtures: All faucets and toilets are functioning properly.
III. Detailed Inspection Results
A detailed breakdown of the inspection results is provided below:
|
Location |
Issue Detected |
Action Required |
Priority |
|---|---|---|---|
|
Kitchen |
Slow-draining sink |
Clear drain blockage |
Medium |
|
Bathroom |
Leaking shower faucet |
Replace faucet washer |
High |
|
Laundry Room |
Water heater corrosion |
Recommend replacement |
High |
IV. Recommendations
Based on the inspection findings, the following recommendations are suggested:
-
Replace the corroded water heater to prevent potential leaks.
-
Install drain filters to prevent future blockages.
V. Conclusion
In conclusion, the plumbing system at [Your Company Address] is generally in good condition. Immediate attention is recommended for the issues highlighted above to ensure continued functionality and prevent any potential water damage.
