Prepared by: [YOUR NAME]
Advanced Solar-Powered Generator
SolarTech Industries
STI-5000X
2060
This equipment is designed for industrial-grade solar energy conversion, with the ability to provide uninterrupted power supply for large-scale operations, including manufacturing plants, data centers, and urban infrastructure.
Complies with ISO 2060: Renewable Energy Systems
Certified under IEC 62109: Safety of Power Converters
UL 1741: Inverters, Converters, Controllers, and Interconnection System Equipment for Use with Distributed Energy Resources
Nominal Output Power: 5000 kW
Peak Power: 5500 kW
Efficiency: 98%
AC Output Voltage: 400V, 3-phase, 50/60 Hz
DC Input Voltage Range: 400V – 800V
Battery Type: Lithium-Ion
Nominal Battery Capacity: 1000 kWh
Backup Duration: 12 hours at full load
Charging Time: 5 hours to 100%
Lifespan: 20 years or 10,000 cycles (whichever comes first)
Max Solar Input Voltage: 1000V DC
Maximum Input Current: 150A
Number of PV Arrays: 8 arrays, 250 kW each
Total Solar Input Capacity: 2000 kW
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 0% – 95%, non-condensing
Protection Rating: IP66 (dustproof and waterproof)
Altitude: Up to 3000 meters without power derating
Frame: Corrosion-resistant stainless steel (Grade 316)
Enclosure: Aluminum with powder-coated finish
Cooling System: Liquid cooling with redundant fans
Weight: 5,500 kg
Dimensions:
Length: 5.2 meters
Width: 2.5 meters
Height: 2.8 meters
Floor-mounted on vibration-dampening pads
Pre-drilled holes for ground anchoring
Total Harmonic Distortion (THD): ≤ 2%
Power Factor: 0.99 at full load
Inverter Efficiency: 97%
Standby Power Consumption: ≤ 50 W
110% Overload: Continuous operation for 60 minutes
125% Overload: 10 minutes
150% Overload: 1 minute
Overvoltage and undervoltage protection
Short-circuit protection
Over-temperature shutdown
Ground fault monitoring
Surge protection (both AC and DC sides)
Emergency Shutdown: Manual and remote-controlled shutdown mechanism
Fire Suppression: Integrated aerosol-based fire suppression system
Lockout/Tagout: Provisions for lockout/tagout during maintenance
Monitoring: Real-time monitoring for voltage, current, and temperature with alarm notifications
CE Mark
UL 62109-1: Safety for Power Converters
IEC 61730: Photovoltaic Module Safety Qualification
Foundation: Reinforced concrete platform, minimum thickness of 300mm
Grounding: Copper grounding rod system, resistance ≤ 5 ohms
Clearance: Minimum 1-meter clearance on all sides for ventilation
All electrical connections must be performed by a certified electrician.
Proper wiring and breaker sizing according to local electrical codes.
Required: Torque wrench, thermal imaging camera, and insulation tester
Recommended: Data logger for real-time performance monitoring
Inspection Frequency: Quarterly inspections for electrical connections, temperature, and performance
Battery Maintenance: Replace after 10,000 cycles or 20 years
Cooling System: Check and replace coolant every 2 years
Error Code E01: Overvoltage – Check PV input voltage
Error Code E02: Over-temperature – Inspect cooling system
Error Code E03: Ground fault – Check wiring and ground connections
Standard Warranty: 10 years of parts and labor
Extended Warranty: Optional 15-year coverage for additional cost
User Manual
Installation Guide
Maintenance Checklist
Troubleshooting Manual
24/7 customer support hotline
Online technical support portal
Remote diagnostics and firmware updates are available via a secure connection
Templates
Templates