Building Permit Inspection Report Template
save
save
copy
downloadDownload
save
save
save
copy
copy

Building Permit Inspection Report

Inspector: [Your Name]

Subject of Inspection: New Office Building

I. Introduction

This Building Permit Inspection Report is prepared by [Your Company Name]. The purpose of this report is to provide an assessment of the new office building located at [undefined]. This inspection aims to verify compliance with building codes and standards as stipulated in the issued building permit.

II. Summary of Findings

The inspection revealed several key points that need attention. Below is a summary:

  • Structural integrity: Satisfactory

  • Electrical systems: Minor issues detected

  • Plumbing: Satisfactory

  • Safety measures: Requires improvement

III. Detailed Findings

A. Structural Integrity

Upon inspection, the structural integrity of the building was found to be satisfactory. The foundation, walls, and roofing meet the requirements set forth during the permit issuance.

B. Electrical Systems

Several minor issues were detected in the electrical systems, including:

  • Improperly secured electrical wiring in the main hall

  • Absence of ground fault circuit interrupters (GFCIs) in critical areas

C. Plumbing

The plumbing system was reviewed and found to be satisfactory. No leaks or blockages were detected.

D. Safety Measures

There are areas where safety measures can be improved. For instance, the emergency exits are not adequately marked and the fire alarm system needs upgrading.

IV. Photos and Evidence

Area

Description

Main Hall

Improperly secured electrical wiring

Emergency Exit

Inadequate signage

V. Compliance Checklist

The following is a checklist of compliance items reviewed during the inspection:

Compliance Item

Status

Foundation

Compliant

Electrical Wiring

Non-Compliant

Plumbing

Compliant

Safety Signage

Non-Compliant

VI. Recommendations

Based on the findings above, the following actions are recommended:

  1. Secure improper electrical wiring in the main hall.

  2. Install GFCIs in critical areas.

  3. Upgrade fire alarm systems.

  4. Enhance emergency exit signage.

VII. Conclusion

[Your Company Name] has conducted a comprehensive inspection of the new office building at [undefined]. While the building is generally in good condition, several issues require attention to comply fully with the building permit. Addressing these recommendations will ensure a safe and compliant structure.

Inspector's Contact Information:

Website: [Your Company Website]

Social Media: [Your Company Social Media]

Name: [Your Name]

Email: [Your Email]

Report Templates @ Template.net