Pre-Start Checklist for Machinery
Pre-Start Checklist for Machinery
|
Date: |
October 22, 2050 |
|
Machine Name/ID: |
Cat 320 Hydraulic Excavator |
|
Operator Name: |
Lyda Fadel |
|
Supervisor Name: |
[Your Name] |
I. Visual Inspection
-
Inspect for any visible damage or wear on the machinery.
-
Check for loose or missing parts (e.g., bolts, covers).
-
Look for signs of leaks (oil, coolant, hydraulic fluid).
-
Ensure all safety guards and shields are in place.
II. Operational Controls
-
Verify that all controls are functioning correctly (e.g., levers, pedals).
-
Test the start/stop mechanism to ensure proper operation.
-
Check for any warning lights or error messages on the control panel.
-
Confirm that all indicators (speed, temperature) are within normal ranges.
III. Fluid Levels
-
Check fuel level and ensure it meets operational requirements.
-
Inspect engine oil level and top up if necessary.
-
Verify coolant levels are adequate for operation.
-
Ensure hydraulic fluid is at the correct level.
IV. Brakes and Steering
-
Test the brakes for proper function (e.g., press and hold).
-
Check the brake fluid level and refill if necessary.
-
Ensure the steering system operates smoothly without unusual noises.
-
Inspect tires for proper inflation and tread depth.
V. Emergency Systems
-
Test the emergency stop button to confirm it functions correctly.
-
Inspect all emergency lights for proper operation.
-
Ensure alarms (audible and visual) are functional.
-
Check fire extinguishers and other emergency equipment are accessible and fully charged.
VI. Documentation
-
Ensure all maintenance logs are up to date.
-
Verify that required certifications and permits are available and valid.
-
Confirm operator training records are current for all users of the machinery.
-
Review safety procedures and emergency response plans specific to the machinery.
Operator:
Lyda Fadel
[Date Signed]
Supervisor:
[Your Name]
[Date Signed]
