Plumbing Maintenance Checklist
Plumbing Maintenance Checklist
Prepared by: [Your Name]
Company: [Your Company Name]
Date: October 29, 2050
I. General Information
-
Property Address: Huntsville, AL 35801
-
Date of Inspection: October 29, 2050
-
Technician Name: Alfonso Jewel
-
Contact Information: 222 555 7777
II. Inspection Areas
Fixtures
-
Check faucets for leaks
-
Inspect toilets for proper flushing and leaks
-
Examine showerheads and tubs for signs of wear or leaks
Pipes
-
Inspect visible pipes for corrosion or damage
-
Check for signs of leaks at joints and connections
-
Verify insulation on exposed pipes (especially in unheated areas)
Water Heaters
-
Check for leaks around the base of the water heater
-
Inspect the pressure relief valve and drain valve
-
Test the temperature setting (ideally around 120°F/49°C)
Drains
-
Inspect all drains for clogs or slow drainage
-
Check the condition of drain covers and grates
-
Flush out drains with a mixture of vinegar and baking soda
Sump Pumps
-
Test the sump pump operation
-
Inspect the discharge pipe for clogs or leaks
-
Check for proper electrical connections and backup systems
III. Maintenance Tasks
-
Clean faucet aerators and showerheads
-
Replace any worn or damaged washers and gaskets
-
Clear debris from floor drains and exterior drains
-
Lubricate exposed moving parts, such as valves and handles
IV. Safety Checks
-
Verify the proper installation of safety equipment (e.g., backflow preventers)
-
Check for signs of mold or mildew around plumbing fixtures
-
Ensure that the main water shut-off valve is accessible and functioning